Wetrooms products and accessoriesWhat are wet rooms, wet-rooms?A wet room is typically a bathroom with a shower section or a shower room which has been built or adapted to be water tight by tanking these with a rubber like coating. Tanking kits are available which contain several components to cater for different projects and situations or these can be purchased individually. A typical tanking kit can contain a matting sheet, a corner tape and the tanking solution which seems to be like a liquid rubber. Other kits may contain primers and even small tanking application tools. There are different methods to creating a wet room with the option of using different substrate and products such as waterproofing membrane, special integrated drain, sloped trays, uncouplers, etc.. etc.. 
|
Schluter SystemThe Schluter®-Shower System is an integrated family of products that creates a “sealed” system. First, the Schluter®-KERDI-DRAIN is installed in conjunction
with either a sloped mortar bed or the Schluter®-KERDI-SHOWER-ST prefabricated foam tray. The KERDI-DRAIN provides a simple and secure connection to the Schluter®-KERDI waterproofing membrane at the top of the assembly via the unique integrated bonding flange. Unlike shower pan liners in
traditional assemblies, KERDI is a bonded waterproofing membrane that allows for the direct application of tile with thin-set mortar. KERDI is bonded to the mortar bed or tray and the surface of the KERDI-DRAIN’s integrated bonding flange. In addition, KERDI is installed over the solid backing (e.g., gypsum board, cement backerboard, etc.) on walls, creating a fully waterproof and vapour tight enclosure. | Schluter-DITRA is specifically designed to allow the installation of ceramic and stone tile over any even and load-bearing substrate. The integration of DITRA’s uncoupling, waterproofing, load-distribution, and vapour management functions makes consistent results viable.
Schluter®-DILEX cove-shaped profiles provide beautiful, maintenance-free countertop/backsplash transitions. These profiles eliminate caulk joints that must be replaced over time. The cove profiles allow for easy cleaning and will not trap debris, making them ideal for areas where food products are handled and strict hygiene is essential. |
